In the Media there was some discussion on cab shelters; this may be of interest to many:))
(Source:- see above article)
On 15 September 2016 I was surprised by the post send by Martin.(PUSH ON ‘read more’….. to find the special pictures)
He completed the BSA vintage bike with side car Taxi model. All as original as possible. In the whole of Europe maybe the only one unless there is one at Beaulieu? It is UNIQUE and he was assisted by his friend Leo Kerkhoff. Leo has ‘golden hands’. Martin himself is one of the best experts in this special field of knowledge.Two years ago he was at Waalwijk on my personal invitation. He again brought a fantastic combination which I reported on. This year I was not invited. After 12 years of organizing Waalwijk.
I can publish his 5 pictures with his consent and I will visit him in Germany (just over our border) Also to see his other 72 vintage motorbikes. I aim at making an article with pictures when home again. What a pleasure to meet and feel absolutely free and this is possible for any oldtimer enthusiast. Membership is not required. You find each other anyway.
The copyrights are in the hands of Martin Smits and Leo Kerkoff.
This article is published in my private Weblog. It is named Dutch London Vintage Oldtimer Taxi News by Hans Dooren.
The LVTA does indicate in their Website this Weblog as “our Weblog”.
This must be corrected.
Since I left the Committee of the LVTA due to lack of support, on that same date my stats recorded 30,000 views, subsequently 33,615 (today) and on this subject 190+ views. It shows the content is being appreciated. At your service! Any comments are welcome, positive or negative. ‘Freedom of speech’ is precious.
Today I found a similar BSA (1924) Motorbike with Side-Car Taxi combination at Birmingham Motorcycle Museum. A lovely surprise.
Bonham’s sold one a while ago for ca. 24,000 B.pounds.
This entire Weblog is edited by myself (Hans Dooren) and has no connection whatsoever with the LVTA and all content was gathered (via Ebay, Events/Vintage Sales, Bootsales, Privately, etc.) on my own account. Also the CDROM’s which the LVTA continues to sell since 22 April 2016, without my consent, were paid, scanned and recorded on Master CD-rom’s entirely by myself. This means they sell without ever paying towards costs made a/o time spent on or making an effort on their production since 1998. I made them aware of these facts many times but never received a positive acknowledgement. They also sell Taxi books but that’s not done without any compensation to the writer. I wonder why!
Countries viewing Weblog – Sept.2017-Mid January 2018
Hong Kong SAR China
Isle of Man
Turks & Caicos Islands
United Arab Emirates
Between 1907 and 1910, this Bedford company offered taxicabs with a choice of 2 or 4 cylinder engines.
In 1906 a unique cab over engine taxicab only ten feet long was introduced with a Glasgow-London demonstration drive. It was replaced by a conventional design with 12/14 HP engine in 1908. In 1910 the Argyll cab received the new Argyll 2.4 litre cast pair 4 cylinder engine. Production was never resumed after the First World War.
The new Asquith Retro-cab embodies the form and flavour of the Austin High Lot with modern Ford running gear. Production seems only to have totalled 10. A modern cab design is believed to be in development.
Austin’s first cab was presented to the Public Carriage Office in 1906, but failed to get approval. A newer version with the driver sitting beside the engine was presented in 1907 and was accepted. Ten of these cabs were run by the Taxi DeLuxe Company of Kensington. One surviving example can be seen at the British Motor Industry Heritage Centre at Gaydon, Warwickshire. A 15hp cab with a more conventional layout superseded the 1907 model a year later.
Developed by co-operation between Austin, the coachbuilders Carbodies of Coventry and London taxi dealers Mann and Overton as a replacement for the obsolete 12/4, this experimental prototype dates from 1945. The FX used a 1800cc sidevalve engine, and was fitted with a pre-war body for testing purposes.
The FX was underpowered, and was replaced by the FX2, which had an all-new chassis, a new 1.8 litre 14hp ohv petrol engine and a prototype coachbuilt body to exactly the same design as would be fitted to the FX3. It was registered as JXN 842 and worked in London for many years before being sold to York.
The FX3 was offered with a 2.2litre ohv petrol engine and an all-steel body from Carbodies. It was available from 1948-1958. The first prototype FX3, JXN 841 went on test alongside the FX2, JXN 842. Aftermarket Perkins and Standard diesel engine conversions prompted Austin to develop their own diesel engine which appeared in 1956. A series of automatic test vehicles in 1957-58, of which two are known to survive.
The hire car version of the FX3 had a front bench seat, forward facing tip up seats in the rear and with higher speed crown-wheel assembly. Four doors and no For Hire sign distinguish it.
The ubiquitous FX4 appeared in 1958 (prototype VLW 431?) with a 2.2 litre diesel engine and automatic gearbox as standard. It remained, albeit heavily modified, in production until 1997. With the Mini, it stands as one of the longest lived British motor designs.
Introduced in 1961, the gasoline powered version of the FX4 used a 2178 c.c. petrol engine.
The diesel version was powered by a BMC K series (2.2 litre) or, from 1971, a British Leyland 25V (2.52 litre) engine. A manual gearbox was made available from 1961.
The hire car version of the FX-4, lacking the For Hire sign, and with higher speed crown-wheel assembly.
Carbodies developed this prototype independent of British Leyland and Mann and Overton during 1977-1979. It would have used a 2.5 litre Peugeot engine. Production was abandoned due to excessive tooling costs.
Carbodies bought the intellectual rights to the FX4 and produced the cab under their own name from 1982. The Company continued to make the FX4D until October 1982.
The FX4D’s old Austin diesel engine would not meet new European exhaust emission requirements and was sold to India. The FX4R built during 1982-1985 was fitted with the 2.25 litre Land Rover diesel, an optional 5-speed gearbox, power steering and full servo brakes
When the FX4R failed to sell as well as hoped, Carbodies began building the FX4Q, which used new and reconditioned parts in a cab powered by the old Austin engine, imported from India, alongside the FX4R. It was sold by Rebuilt Taxicabs in London’s East End.
LTI Carbodies, London Taxis International
When Carbodies owner, Manganese Bronze plc, bought Mann and Overton, a new company, London Taxis International, was formed with two divisions: LTI Carbodies, to make the cabs; and LTI Mann and Overton, to sell them, principally in London.
The first cab to bear the LTI name, this 1985-1987 variant of the FX4R was fitted with the 2.5 litre Rover diesel.
Available during 1987-1988, the 5-seater FX-4S Plus was fitted with more driver amenities, and is distinguished by its grey interior.
CR6 (City Rover 6)
Three experimental prototypes were built using the FX5 chassis, Rover SD-1 running gear, a Land Rover diesel engine and a modified Range Rover body. It was planned for a 1984 introduction, but due to ever increasing development costs was never produced.
This version of the FX-4 went into production in 1989. It was powered by a Nissan 2.7 litre diesel, coupled to a choice of a Nissan 4-speed automatic or 5-speed manual. It was the first FX4 to be wheelchair accessible.
Introduced in 1993, the Fairway Driver featured all-new front suspension and brakes, with discs on the front. The last Fairway rolled off the production line October 1, 1997 and was immediately presented to the National Motor Museum at Beaulieu. It carries the registration number R1 PFX.
The TX1 was shown at the Motor Show, October 14, 1997, and the first TX1 plated by the Public Carriag0e Office is R948 VOB. The TX1 uses the same running gear as the Fairway Driver, under an all-new five-seat body. The model number was as a result of an idea by LTI to return to Austin’s old numbering system. It is simply the word TAXI with the A removed.
FX3 and FX4 chassis were available, and used as the basis for newspaper vans, hearses, flower cars, etc. At least two FX3 shooting brakes were constructed, one for the John O’Groats House Hotel, plus specials for oil magnate Nubar Gulbenkian. Two FX4 stretch limousines, one six door by hearse specialists Woodhall Nicholson and one four-door by Tickford, were constructed in the late 1980′s.
The first Beardmore taxicab, 1919-1923. Fitted with Beardmore’s own 15.6 HP engine, it was in its time known as the Rolls-Royce of cabs. The steel and shipbuilding company of Beardmore was at this time the largest industrial conglomerate in Scotland. Production of the taxi was at Paisley, on the outskirts of Glasgow.
Mark II Super
The Super had few changes from the Mark I, limited mostly to a cleaning up of the original design, with more refined wing edges, etc. Production ended in 1926.
Mark III Hyper
Introduced in 1926, and produced until 1932, the Hyper was the first cab with four-wheel braking. It was substantially smaller and lighter than its predecessors, and was fitted with a 12.8 HP engine. It had a reputation for quickness and maneuverability, and was nicknamed the Farthing Cab.
Mark IV Paramount
Following the end of production of the Mark III in 1932, Beardmore’s taxi division was bought out by its management and they moved taxi production from Scotland to the London service depot at Hendon. The Mark IV appeared from this site in 1934, powered by a 14 HP Commer engine.
Mark V Paramount Ace
In 1935 Beardmore’s offered the Mark V, whose main difference from the previous model was a transmission with synchromesh on 3rd and 4th gears like the Austin TT and a longer wheelbase. This cab was sometimes called the Paramount, sometimes the Ace.
Mark VI Ace
The last pre-war Beardmore. It is notable that it was fitted with full synchromesh. Early conversion of Hendon to war production caused this cab to be discontinued in 1939.
Built from 1954 to 1967, the Mark VII was far more advanced than its traditional appearance would suggest. Constructed of aluminium and glassfibre with Ford Consul running gear, it was one of the first taxis with hydraulically actuated brakes. Approximately 650 were built in 3 production series.
Never progressing beyond a working prototype, the planned Mark VIII became the basis for the Metropolitan-Cammell-Weymann Metrocab.
Bedford produced several a taxi prototypes based on its small CA van.
In 1907 Belsize introduced a 14/16 HP taxicab. Taxis became, and remained, a major part of the company’s commercial output. When postwar production was resumed only the taxi and vans based on the 20 HP 4 cylinder engine were offered. Production was discontinued in 1925.
Between September, 1897 and December, 1898 70 Bersey electric storage battery cabs, nicknamed “Hummingbirds”, were put on London streets by the London Electrical Cab Company, Walter C. Bersey, General Manager. Berseys were built by the Great Horseless Carriage Company, fitted with Mulliner bodies and powered by 3-1/2 horse power Lundell type motors with a range of 30 miles, and a top speed of 9 mph. An improved version with larger batteries was constructed by the Gloucester Railway Waggon Company. Breakdowns, coupled with the high cost of batteries and tyres made operations unprofitable, and the company was closed down in August, 1899. A single Bersey is preserved at Beaulieu.
In 1954, cab operator Birch Brothers, Ltd. developed a prototype cab (SJJ 111) based on Standard running gear with body by Park Royal Vehicles. It was the first cab to be licensed in London with four doors. However, the layout was unconventional in that three passengers sat on the rear seat, and the fourth sat alongside the driver, facing rearwards. Luggage was carried in a rear compartment, which was accessed by a full height door on the nearside quarter of the body. Only the one prototype was made.
The Brasier 10/12 HP vertical twin engined car with 3 speed transmission was marketed as a cab from 1908 to 1913.
This unique body style with transverse sliding passenger door appeared in 1929, the design of Mr. W. Gowan of Cape Town, South Africa – hence the name. The first prototype was fitted to a Morris Commercial chassis, later versions, some by Arthur Mulliner, rode Austin running gear. Some bodies were constructed by New Avon Body Company. In all, over 100 were built during 1929-1936.
This name was given to Austins fitted from 1933 with bodies taken from London General’s retired Citroen 11/4 cabs. [From Chinese Puzzle]
Andre Citroen offered a 1.5 litre taxicab from 1923, and four wheel braking was standardised from 1926, when British assembly was commenced at Slough. In 1929, Citroen provided the mechanical components for a series of taxicabs built by the London General Cab Company.
Birmingham Small Arms Company (BSA)
In 1920-25, BSA built a limited number (frame numbers W1- W100) of small three wheeled cabs using their Model E 770cc V- twin engine. By 1924, their Model G 986cc engine was standard. CD8953, a Brighton Ba-Tax cab, survives and has been restored.
This well known commercial vehicle builder constructed a few taxis in its early years before car production was discontinued in 1913.
In an project to further research into hybrid fuel vehicles, International Automotive Design of Worthing, Sussex, produced the Eurotaxi. Of van/MPV appearance, it was driven by a 50kw AC electric motor, which received its power via an onboard generator driven by a small diesel engine. Top speed was 65mph, and the range was 100 miles.
In 1920 a few Fiat IT cabs were introduced in London, powered by a 1.8 litre engine
Hillman offered a taxicab version of its 12/15 car with a 2.4 litre 4 cylinder L-head engine during 1909-1910.
In 1907, Britain’s taxicab boom began, and Humber offered an Argyll-like cab-over design with seven foot wheelbase and 4 cylinder, 15 HP engines with coil ignition. In 1908, both cab- over and conventional designs were offered using the 10/12 HP engine, and a 2-1/2 litre Beeston-Humber with magneto ignition. In 1910, only the conventional 10/12 HP design was offered. Humber, Ltd. operated a fleet of 40 Humber cabs in London.
London Coach was formed in May, 1984 to fill the need for purpose built cabs left by the 1982 decision by Checker Motors (USA) to discontinue cab production. EPA prototype testing was completed in August, 1985. These specialty vehicles were assembled in the US, using glider kits provided by Carbodies and fitted with 2.3 litre Ford engines and transmissions. Two models were available: The London Taxi and the London Sterling. The Sterling was a limousine version of the taxi. Both were available with or without air conditioning. Production for 1985-1986 was reported as 75 to the NHTSA, and estimated production for 1987 – 75. With the introduction of the Rover Sterling by ARCONA in 1987, London Coach was pressured to discontinue use of the Sterling name. Total production is estimated at 80-100.
London Taxis International
This subsidiary of Carbodies, Ltd. of Coventry was formed to produce the FX-4 when British Leyland discontinued taxi production in 1987. See discussion under Austin.
Electrical equipment manufacturers Joseph Lucas introduced a prototype electric cab in October 1975. Several feet shorter than the FX4, it was powered by a 50bhp CAV motor, which gave it a top speed of 55mph. Its 100 mile range was somewhat limited by the battery technology of the day.
The 1922 Mepward by Mepstead and Hayward of London was a truly bad cab. It had an all-wood body, which made the already inadequate 2178 cc engine work even harder. The late Simon Kogan, writing in Taxi
The Metrocab design was based on models and early work for the Beardmore Mark VIII by Metro-Cammell-Weymann in conjunction with the London General Cab Company.
Two of three developmental protoypes survive today, “Edgar” POE 629R, and UOK 729H which actually worked as a taxi in the in London in the General’s fleet.
Introduced in 1987, this fibreglass-bodied cab was powered by a 2.5 litre- four cylinder Ford Transit direct injection diesel engine coupled to a Ford four-speed automatic or a five- speed manual gearbox. It was the first London cab to fully wheelchair accessible and to be licensed by the Public Carriage Office to carry four passengers.
Reliant bought the Metrocab from MCW in 1989, and moved the plant to Tamworth, Staffordshire.
When Reliant suffered financial trouble, Hooper bought Metrocab and began a steady programme of improvement. In late 1992 the Metrocab became the first London cab to be fitted with disc brakes as standard. Six- and seven seat versions followed. The restyled Series II was introduced in 1997 and featured a great many detail improvements. In 2000 a turbocharged Toyota engine replaced the Ford in the TTT model.
The Mitsubishi MMT taxi was a conversion on the L300 forward control van. It was powered by the standard 1600cc petrol engine, converted to run on LPG. The cab trade did not at the time consider a van conversion, even though 25% cheaper than an FX4, a suitable vehicle for London taxi use. The vehicle did not meet the PCO 25ft turning circle requirement and was not approved for use in London
Lord Nuffield’s organisation produced a line of taxicabs under the Morris Commercial name during the late 1920s and 1930′s.
Type G “International”
From 1929, Morris offered a cab powered by its 4 cylinder 1.8 litre Oxford car engine, based on the unsuccessful Empire Oxford car.
This smaller version of the G, introduced in 1931, was known as the “Junior”.
Introduced in 1932, a 15hp side valve 6 cylinder engine was fitted. A well-built cab, it was popular with owner-drivers.
A newer version of the G2S introduced in 1937, this cab had a 1.8 litre overhead valve six-cylinder engine rated at 14hp. To date, the Morris is the only maker of London cab to fit six-cylinder engines.
Approximately 1800 Oxfords were built from 1947-1955 based on a 1940 prototype, which accumulated 100,000 miles during wartime service. Built at the Wolseley factory in Birmingham, the Oxford was the first new cab to be offered on the London market after WWII. It was powered by a 1.8 litre dry-sump industrial engine, derived from a contemporary MG unit. Three successive models were introduced: the MkI, the 1949 MkII with a six-light body and the 1950 MKIII, distinguished by its pressed steel wheels, instead of the artillery wheels of the previous models. When Morris and Austin merged to form the British Motor Corporation in 1952, the new organisation found that it was making two competitive vehicles for the same market, the Oxford and the Austin FX3, so in 1953 the older Oxford was dropped.
D. Napier & Son, Ltd., of Acton, produced a taxi which from 1908-1911 was their primary commercial vehicle offering and which very substantially exceeded car production. These cabs featured an L-head engine, 3 forward speeds and shaft drive. They were offered in either a 1.3 liter 2 cylinder form, or 2.7 litre 15 HP 4 cylinder form. The 4 cylinder taxi was extensively exported.
The French built Prunel had the distinction, in 1903, of being the first motor cab to be licensed to work in London. Operated by the Express Motor Service Company, it had a two-seat Hansom body, a 12hp Aster engine and chain drive.
This old French maker supplied taxis to Paris. In 1907 the General Motor Cab Company of Brixton bought 500 2-cylinder Renault cabs. With a 2-cylinder engine of 8-9hp they were somewhat underpowered. They ran until the General began replacing them with Unics.
This fibreglass taxi was developed and built by Winchester Automobiles (West End) Ltd., a subsidiary of the Westminster Insurance Group, after consultation with cabmen. The result was a conservatively styled low maintenance vehicle, which was manufactured in several models from 1963-1972.
Mk I (1963)
The Mark I was powered by a Perkins 4.99 diesel and had two-tone grey paint.
The Mk II shared the same body as the MkI, but had a 1.7 litre Ford Transit petrol engine.
Using the Ford Transit engine, this version had an all- new chassis by Keewest.
Mk IV (1968)
The MkIV had an all-new body on the MkIII chassis and its Fords Transit engine.
This French cab was extremely popular with London operators for 25 years (1907-1932). It started life in London in 1907, powered by a 2-cylinder engine. Post war versions were little different from their Edwardian predecessors, although now fitted with four-cylinder engines. High import duties and the sheer antiquity of the cab prompted Unic’s dealers, Mann and Overton, to seek a replacement, which they found in the Austin 12/4.
A new model from Unic, built in Britain by United Motors, the 1930 KF1 was heavy and expensive. Few were sold.
In 1905, Vauxhall offered a 3-cylinder Motor Hansom for taxi service.
In 1990 a taxi conversion of the Midi van was produced for the NEC Motor Show. Whilst its interior complied with the PCO specifications, it did not have the mandatory 25ft turning circle
In 1922 Vulcan introduced a 2.6 litre, T-head taxicab. In 1928, car production was abandoned, and by 1931 Vulcan was in receivership.